I do not know how to set this up. Those long wires don’t seem to fit into anything. The probe fits into the toner, but only one spot and there are two spots and there are not any clear directions. Please help.
The two bundles of wires included in your kit are to attach optional accessories. They won’t be used unless you want to attach electrode pads, etc.
The complete user guide can be downloaded from our site under Q&A if you need to enlarge the print. There are quick start instructions under Q&A as well.
But in short:
Plug the probe wire into the left side of your toner.
Add a dab of water based personal lubricant to the end of the probe.
Insert the probe with the metal panels facing hip to hip and the flange at the base of the probe flush with your vaginal opening.
Power on your unit using the top button out of the four in the circle.
Press the P button to cycle through all of the available programs, a good place to start is P06.
Now tap the + key on the left side of your unit until you reach a comfortable level of stimulation. The unit will go all the way to 99 and you will see the number at the bottom left side of the unit rise as you continue tapping the + key. Do not use the right + key, it is only for optional accessories plugged into the right side of the unit.
Now you allow the program to run. It will slowly count down until the program is complete.
Lastly, power off your unit before removing your probe and washing it with hand soap and water.
Remember to urinate after your exercise. As with any vaginal penetration, it is best practice to flush the urethra to ensure you didn’t introduce any bacteria with insertion.
The other buttons in the circle are for optional settings that you will not need at this time.
Please contact customercare@kfitkegeltoner.com for more personalized support.
The two bundles of wires included in your kit are to attach optional accessories. They won’t be used unless you want to attach electrode pads, etc.
The complete user guide can be downloaded from our site under Q&A if you need to enlarge the print. There are quick start instructions under Q&A as well.
But in short:
Plug the probe wire into the left side of your toner.
Add a dab of water based personal lubricant to the end of the probe.
Insert the probe with the metal panels facing hip to hip and the flange at the base of the probe flush with your vaginal opening.
Power on your unit using the top button out of the four in the circle.
Press the P button to cycle through all of the available programs, a good place to start is P06.
Now tap the + key on the left side of your unit until you reach a comfortable level of stimulation. The unit will go all the way to 99 and you will see the number at the bottom left side of the unit rise as you continue tapping the + key. Do not use the right + key, it is only for optional accessories plugged into the right side of the unit.
Now you allow the program to run. It will slowly count down until the program is complete.
Lastly, power off your unit before removing your probe and washing it with hand soap and water.
Remember to urinate after your exercise. As with any vaginal penetration, it is best practice to flush the urethra to ensure you didn’t introduce any bacteria with insertion.
The other buttons in the circle are for optional settings that you will not need at this time.
Please contact customercare@kfitkegeltoner.com for more personalized support.